Highly oil yield rate waste rubber to oil recycling equipment

A. Environmental protection; B. High output; C. Easy and quick installation; D. Energy saving; E. Labor saving;

 

Main Advantages:

 

Environmental Protection:

our waste tire/ plastic / rubber recycling equipments are certificated by CE and ISO, totally environmental friendly.

 

      the special design about waste gas recycling system can reuse the gas (CH4/C2H6/C3H8/C4H10) to reheat the reactor as fuel, not only protecting environment but also saving energy.

      the residue of our waste tire/ rubber recycling equipments is carbon black, is used in many industries such as electric cable jacketing, rubber additive. and the residue of waste plastic equipments can be processed to be bricks.

      the waste water from de-dusting system is acidic, which need to add alkali to be neutralized. but the water won't be discharged, it will be reuse again.

      and the noise of processing is ≤85.

 

High Efficiency:

Fast practical feed-in and discharge system. The highest feed-in quantity of the XD-10 every 24 hour achieved 10 tons, Discharge time for 300kg carbon black only needs 90 minutes. The highest feed-in amount of the integral unit equipment every 24 hours achieves 15 tons.

 

 

Energy saving:

 

the thermal insulating layer is made by rock wool, concrete and refractory material,  the cover is made by arc-shaped steel, not only good looking, but also  good sealability.

 

the vacuum device makes reactor working the state of negative pressure, thus decreasing hydrolysis temperature, then saving  fuel.

 

the waste gas will be burnt as fuel during the heating process.

 

 

High output:

 

There are 57 pipes in our vertical condenser; the diameter of each pipe is 30mm, the length is 1500mm and the cooling area is 13m². We offer 3 condensers for XD-6 machinery, the total cooling area is about 40 m².

 

Horizontal condenser also has 57 pipes, the cooling area equals to 5 vertical condensers. If you want 8 tons plant, we can ofer you 1 horizontal condenser and 1 vertical condenser.

 

About 70% of the heavy oil is cooled and separated after the high temperature oil-gas going through condenser pipe and the oil –water separator, the rest of 30% of light oil is cooled after going through the second grade and third condensers. Thus the oil output increase.

 

 

Technical Parameters:

 

	Items	Contents
1	Equipment type	XD-06	XD-08	XD-10
2	Raw material	tires/Plastic/rubber	tires/Plastic/rubbrt	tires/Plastic/rubber
3	Structural form	Horizontal rotation	Horizontal rotation	Horizontal rotation
4	24-hour Capacity	6 ton	8 ton	10 ton
5	Oil yield	2.7~3 ton	3.6~4 ton	4.5~5 ton
6	Operating pressure	Normal	Normal	Normal
7	Material of reactor	Q345R	Q345R	Q345R
8	Thickness of reactor	14mm	14mm	14mm
9	Rotate speed of reactor	0.8turn/minute	0.8turn/minute	0.8turn/minute
10	Total power	12KW	12KW	12KW
11	Mode of cooling	Water cooling	Water cooling	Water cooling
12	Kind of transmission	Internal gear drive	Internal gear drive	Internal gear drive
13	Noise dB(A)	≤85	≤85	≤85
14	Size of Reactor(D×L)	2000×6000	2200×6600	2600×6600
15	Working form	Intermittent operation	Intermittent operation	Intermittent operation
16	Delivery time	20days	20days	20days
17	Weight	18~22T	20~25T	25~30T